|
|
| HOME > SOLUTIONS > HEAT TRANSFER MATERIALS |
| Recommended Applications: Cotton, Polyester, Poly/Cotton Blends, Teamwear, Caps |
Position MultiCut in cutter with matte side up.
All designs should be cut mirrored.
Once cut, weed out unwanted area with weeding tool or exacto knife.
Position weeded MultiCut film on shirt.
Ensure heat press is set at 340°F (170°C)
Press film with medium to firm pressure for 20 seconds at 340°F (170°C)
Release clear film while transfer is still hot
When pressing multiple layers of color with MultiCut, place the second layer of color over the first one then cover the whole transfer with silicon paper or with the mylar peeled on the previous step (must cover the entire vinyl area) with the sticky side down (silicon paper is sold sepa-rately per sheet or you can use non waxed craft paper).
Silicon paper can be reused until it turns brown |
|
|
|
|
